Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Stop Bulb on Kymco Super8 125

Model: Kymco Super 8 125
Part: Tail light bulb

Video tutorial

To begin, open the seat to access the compartment underneath, then unscrew all the screws securing it (both at the front, where the opening is, and at the rear) as shown in the video. Remove the entire seat/under-seat assembly, move the tank forward (now you have the necessary space), and finally, with some effort, reach the rear stop bulb, disconnect it, and replace it. Proceed in reverse to reassemble everything and check the correct operation of the new bulb.

As you can see, this is a task that takes some time but is still quite simple.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Kymco Super 8 125
How to Replace the Rear Light Bulb on a Kymco Super 8 125
Super 8 125 Today, discover the guide that will allow you to dismantle and replace the rear light bulb of the Kymco Super 8 125 scooter. First, place your scoote…
How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Exhaust on a Kymco Super 8 125?
How to Replace the Exhaust on a Kymco Super 8 125?
Super 8 125 To replace the exhaust on a Kymco Super 8 125, loosen the screws that secure the exhaust end can to its mounting near the rear wheel on the right sid…

How to Dismantle the Carburettor of the Aprilia Scarabeo 150

Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your scooter on the centre stand and begin by removing the plastic cover located under the seat. Then, disconnect the fuel hose from the carburettor and the throttle cable, as shown in the video. At this point, loosen the screw of the air filter box clamp and that of the intake manifold; then remove the carburettor, performing cleaning or replacement as necessary!

Watch the video!


by ScegliAuto

More videos