Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide explains how to remove and replace the engine spark plug on a Kymco Downtown 300 injection scooter, following the instructions below. First, open and lift the seat, then start by removing the under-seat compartment by unscrewing all the indicated fixing screws; this gives access to the top of the engine. Next, disconnect the spark plug lead or cap found on the cylinder head and use a socket wrench with an extension to unscrew and remove it; simply replace it with the new one, screwing it in by hand before tightening with the wrench!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Kymco Downtown 300i?
How to Reset the "Service" Light on a Kymco Downtown 300i?
Downtown 300i First, sit on the seat of your Kymco Downtown 300i. Start by activating the instrument panel by turning the key in the ignition switch. Next, press a…
Replacing the Water Pump on the Kymco Downtown 300i
Replacing the Water Pump on the Kymco Downtown 300i
Downtown 300i This guide outlines the main steps to remove and replace the coolant pump on the Kymco Downtown 300i scooter. First, place the central stand and star…
How to Replace the Variator and Batteries of the Kymco Downtown 300i
How to Replace the Variator and Batteries of the Kymco Downtown 300i
Downtown 300i Below are the instructions that will allow you to disassemble and replace the rollers and variator of the Kymco Downtown 300i scooter. First, place t…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos