Do it yourself
| ||||
|
Model: Kymco People Gt 300i
Let's see in this guide the main steps that will allow us to bleed and top up the coolant of the Kymco People GT300i scooter. First of all we remove the plastic cover that we find on the platform, in order to access the coolant fill tank; after which, if necessary, bleed the coolant by disconnecting the hose from the water pump. At this point, unscrew the filler cap and pour in the new coolant, of the right type; let's start the engine to let the liquid enter the circulation!
Posted on 14 April 2024 by ScegliAuto
|
How do you replace the gear oil of the Kymco People S 200?In order to replace the gear oil of the Kymco People S 200, you need to loosen the screws that secure the transmission casing located on the rear side of the motorcycle, on the left side: by loosening the casing, you will be able to locate the drain plug underneath. This way, the plug can be loosened and it will be possible to collect all the used oil inside a properly positioned container. Once all the oil has drained out, you can pour in the new oil through the vent located slightly above the drain plug, so that the necessary amount of oil is inserted. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |