Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Kymco Xciting S 400i

Model: Kymco Xciting S 400i
Part: Engine oil

Video tutorial

To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you to collect all the used oil in a suitably placed container. Next to the drain plug, you will also find the oil filter, which can be removed from its housing and replaced with a new spare part.

After replacing the filter, top up the oil by pouring the new oil through a funnel from the breather located on the left side of the bike.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Kymco Xciting S 400i?
How do you replace the engine oil of the Kymco Xciting S 400i?
Xciting S 400i To perform the oil change on the Kymco Xciting S 400i, you will need to loosen the screws that hold the drain plug of the oil pan located in the cent…
How to Change the Engine Oil on Kymco Xciting S 400i?
How to Change the Engine Oil on Kymco Xciting S 400i?
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, first unscrew the oil drain plug located at the central lower part of the bike: this will allow…
How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
How to Change the Engine Oil and Oil Filter on a Kymco Xciting S 400i
Xciting S 400i The instructions in this guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Kymco Xciting S 400i…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos