Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove the rear wheel of the Kymco Grand Vista 250 scooter, following the instructions below. First, place the central stand on your scooter and start by unscrewing the fixing bolt of the suspension, which is located at the bottom; then use a socket spanner to unscrew the central nut of the wheel, thereby removing the axle, as shown in the video. At this point, remove the brake caliper from the disc and then the wheel; simply reassemble everything by applying the reverse procedure!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on a Kymco Grand Vista 250?
How to Replace the Belt on a Kymco Grand Vista 250?
Grand Vista 250 To replace the belt on the Kymco Grand Vista 250, loosen the bolts securing the cover on the left side of the bike, near the rear wheel. Once this co…
How to Replace the Headlight Bulb on a Kymco Grand Vista 250?
How to Replace the Headlight Bulb on a Kymco Grand Vista 250?
Grand Vista 250 To replace the headlight bulb on the Kymco Grand Vista 250, loosen the screws securing the front fairing of the bike to its housing: the screws will …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos