Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on a Kymco Grand Vista 250?

Model: Kymco Grand Vista 250
Part:

Video tutorial

To replace the belt on the Kymco Grand Vista 250, loosen the bolts securing the cover on the left side of the bike, near the rear wheel. Once this cover is removed, you can access the components underneath: specifically, loosen the central pin of the variator and all the bolts securing the clutch.

After these two components are removed, you can slide the belt out of its housing, allowing you to insert a new one along with the corresponding variator and clutch.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Grand Vista 250 To replace the headlight bulb on the Kymco Grand Vista 250, loosen the screws securing the front fairing of the bike to its housing: the screws will …
Grand Vista 250 In this video tutorial, you will learn how to remove the rear wheel of the Kymco Grand Vista 250 scooter, following the instructions below. First, pl…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Adjust the Throttle Play on a Piaggio Vespa GTS 300

In this video, you will learn how to adjust the throttle play on a Piaggio Vespa GTS 300. It is best if there is no play on the throttle grip. You will need a screwdriver. Open the engine compartment by lifting the seat and locate the throttle body, secured by two rubber inserts. Loosen two clamps to tilt the throttle body and expose the throttle cable. You will need an 8 mm and a 10 mm spanner. Identify the locking cable and adjust it from here, checking the adjustment at the throttle grip: the play should be zero or very close to it. Once you achieve the desired result, refit the throttle body and close the seat.

Watch the video!


by ScegliAuto

More videos