Do it yourself
Frequently asked questions about cars and motorcycles
Here are the instructions to remove and replace the front brake pads on the Kymco Super 8 150 scooter. First, place your scooter on the centre stand and begin unscrewing the fixing screws of the front brake caliper to remove it from the disc. Then, apply pressure to the caliper piston to retract it, allowing you to remove the old brake pads, as shown in the video. Now, clean the caliper of any dirt and install the new high-quality brake pads. Refit the caliper onto the disc, securing it properly!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Super 8 150 Follow this guide to remove and replace the rear brake shoes on the Kymco Super 8 150 scooter. First, place your scooter on the centre stand and begi…
Super 8 150 The steps outlined in this guide will show us how to adjust the rear brake of the Kymco Super 8 150 scooter. First, we put the scooter on the center …
Super 8 150 Today we will discover the steps necessary to replace the engine oil, performing the routine maintenance check of the Kymco Super 8 150 scooter. Firs…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos