Do it yourself
Frequently asked questions about cars and motorcycles
To replace the air filter on the Kymco Super 8 150, loosen the screws securing the cover on the left side of the bike, near the rear wheel and above the transmission cover. Once the bolts are loosened, you can remove the cover and then undo the screws securing the filter itself: the filter can now be pulled from its housing and replaced with a new spare part. Once the new filter is secured, you can reinsert the protective cover, fastening it with the appropriate bolts.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Super 8 150 Today we will discover the steps necessary to replace the engine oil, performing the routine maintenance check of the Kymco Super 8 150 scooter. Firs…
Super 8 150 To replace the clutch of the Kymco Super 8 150, you need to loosen the screws that secure the transmission cover, which is located near the rear whee…
Super 8 150 In this tutorial, you will learn how to reset the oil service on the Kymco Super 8 150 scooter. Before performing this simple operation, ensure that …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos