Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Kymco Super 8 150 Scooter?

Model: Kymco Super 8 150
Part: Service warning light

This video is currently unavailable

In this tutorial, you will learn how to reset the oil service on the Kymco Super 8 150 scooter. Before performing this simple operation, ensure that you have completed the required maintenance tasks.

Start by inserting the key and turning on the ignition. Then, press the "Mode" button located to the left of the display for about 2 seconds.

Next, hold it down for another 2 seconds, then release it and press both display buttons simultaneously. Keep the buttons pressed until the orange indicator light turns off.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to replace the engine oil of the Kymco Super 8 150
Super 8 150 Today we will discover the steps necessary to replace the engine oil, performing the routine maintenance check of the Kymco Super 8 150 scooter. Firs…
How to adjust the rear brake of the Kymco Super 8 150
How to adjust the rear brake of the Kymco Super 8 150
Super 8 150 The steps outlined in this guide will show us how to adjust the rear brake of the Kymco Super 8 150 scooter. First, we put the scooter on the center …
Replace the Front Brake Pads on a Kymco Super 8 150
Replace the Front Brake Pads on a Kymco Super 8 150
Super 8 150 Here are the instructions to remove and replace the front brake pads on the Kymco Super 8 150 scooter. First, place your scooter on the centre stand …

How to Replace the Air Filter on the Triumph Tiger 1200

Through these simple steps, you will see how to remove and replace the engine air filter on the Triumph Tiger 1200. First, place the motorcycle on its centre stand and begin to remove the fuel tank; then disconnect the fuel hose and unscrew the fixing screws to remove it, as shown in the video. At this point, unscrew the screws of the air filter box cover, removing and replacing the cartridge with the new one; insert it in the correct orientation and reassemble the filter box, then reinstall the fuel tank. Start the engine!

Watch the video!


by ScegliAuto

More videos