Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Dink
Part: Windshield

As shown in this tutorial, replacing the windscreen on a Kymco Dink scooter is an extremely simple and quick task. First, remove the fixing bolts of the old windscreen located along the lower edge and at the sides of the instrument panel, then separate it from the handlebar and remove the rubber supports situated inside the holes. Insert these into the replacement part, mount the corresponding frame using the screws previously removed, and secure the windscreen using the supplied caps. Finally, tighten each screw and ensure everything is securely fastened.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb on the Kymco New Dink?
How do you replace the headlight bulb on the Kymco New Dink?
Dink In order to replace the headlight bulb of the Kymco New Dink, you need to loosen all the screws at the base of the windshield: once these screws are …
How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…
How do you replace the speedometer cable of the Kymco New Dink?
How do you replace the speedometer cable of the Kymco New Dink?
Dink To replace the speedometer cable of the Kymco New Dink, you need to loosen the screws that secure the front fairing of the motorcycle to its housing:…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos