Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the speedometer cable of the Kymco New Dink, you need to loosen the screws that secure the front fairing of the motorcycle to its housing: you will have to unscrew the screws located immediately under the windshield and also those located immediately in front of the footrest compartment. In this way, the panel can be completely detached and subsequently access the underlying components: the speedometer cable can be located and removed from its seat. The new replacement piece can then be inserted, verifying that everything works.

Posted on 14 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the variator of the Kymco Dink?
How do you replace the variator of the Kymco Dink?
Dink To replace the variator on the Kymco Dink, you need to loosen the screws that secure the transmission cover, located on the left side of the motorcyc…
How to reset the Oil Service light on the Kymco Dink R 150?
How to reset the Oil Service light on the Kymco Dink R 150?
Dink To reset the Oil Service light on the Kymco Dink R 150, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on…
How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos