Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Dink
Part:

To replace the variator on the Kymco Dink, you need to loosen the screws that secure the transmission cover, located on the left side of the motorcycle near the rear wheel. Once this cover has been removed, you can proceed by loosening the central nut that secures the variator to its housing. This must also be freed from the corresponding transmission belt so that the new replacement part can be inserted: it will be necessary to secure it and reposition the belt to ensure that everything is functioning properly.

Posted on 7 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake pads of the Kymco Dink R 150?
How do you replace the rear brake pads of the Kymco Dink R 150?
Dink In order to replace the rear brake pads of the Kymco Dink R 150, you will need to loosen the screws that hold the brake caliper to the corresponding …
How to replace the engine oil in the Kymco Dink 150?
How to replace the engine oil in the Kymco Dink 150?
Dink You can perform the engine oil change on the Kymco Dink 150 by loosening the drain plug of the oil sump, which is located at the central lower part o…
How do you replace the speedometer cable of the Kymco New Dink?
How do you replace the speedometer cable of the Kymco New Dink?
Dink To replace the speedometer cable of the Kymco New Dink, you need to loosen the screws that secure the front fairing of the motorcycle to its housing:…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos