Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The operation of replacing the exhaust on the Keeway RKF is carried out by loosening the screws that fix the exhaust terminal at the lower support near the crank and at the mudguard of the motorcycle. After these two screws have been loosened, it will be possible to unscrew the two screws that fix the initial part of the exhaust to the remaining part of the exhaust pipe, at the front of the motorcycle. In this way, the old exhaust can be completely removed from its seat, replacing it with a new spare part and verifying that everything works.

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The operation of replacing the exhaust on the Keeway RKF 125 is carried out by loosening the screws that fix it at the lower support near the cranksh…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 On board the Keeway RKF 125, it will be possible to replace the exhaust by loosening the screws that fix it at the lower support near the footrest an…
How do you replace the exhaust pipe of the Keeway RKF 125?
How do you replace the exhaust pipe of the Keeway RKF 125?
Rkf 125 The exhaust terminal of the Keeway RKF 125 can be replaced by loosening the screws that fix it at the lower support near the crank and at the rear wh…

How to Replace the Rear Brake Pads on the Triumph Street Triple 765 RS?

In this tutorial, see how to replace the rear brake pads on the Triumph Street Triple 765 RS, a very simple and quick operation. Start by positioning yourself in front of the brake in question, then grip the caliper and press it firmly against the disc to compress the piston. Once done, release the indicated clip, remove the upper pin, and separate the old pads from the caliper. At this point, clean any dirt residue, insert the replacement pads, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos