|
Do it yourself
| |||
| ||||
Model: Bmw R 1200 Gs
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.
Updated on 6 July 2026 by ScegliAuto
Video tutorial
Related tutorials
R 1200 Gs
In this guide, we will see the information that will allow us to disassemble and overhaul (or replace) the shaft drive of the BMW R 1200 GS. First, l…
R 1200 Gs
To remove the front wheel of the BMW R 1200 GS, first loosen the bolts securing the front brake caliper to the disc. Once these bolts are loosened, y…
R 1200 Gs
In this tutorial, we will see how to replace the battery in the remote for the BMW R 1200 GS, an extremely simple and quick operation. To do this, yo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.103
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |