Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on the Kymco People 150

Model: Kymco People 150
Part: Transmission fluid

Video tutorial

Let’s go through the steps to drain and refill the transmission oil on the Kymco People 150 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the transmission casing, allowing it to drain into a container for about ten minutes; unscrew the filler cap to let the oil flow out more quickly.

At this point, refill with the new gear oil suitable for your transmission, pouring in the correct amount as indicated in the user and maintenance manual.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Kymco People 150
How to Change the Engine Oil on the Kymco People 150
People 150 Today, we will go through the steps to perform the routine maintenance oil change on the Kymco People 150 scooter. First, place your scooter on the c…
How to Change the Engine Oil on the Kymco People 150?
How to Change the Engine Oil on the Kymco People 150?
People 150 To change the engine oil on the Kymco People 150, loosen the drain plug located at the bottom of the transmission casing on the right side of the sco…
How to Replace the Oil Filter on a Kymco People 150?
How to Replace the Oil Filter on a Kymco People 150?
People 150 To replace the oil filter on a Kymco People 150, access the underside of the scooter, just in front of the rear wheel. Here you will find the oil dra…

How to set the clock on a Yamaha V-Star 1300?

To set the clock on a Yamaha V-Star 1300, press and hold the RESET button and the SELECT button upwards, after turning on the ignition by turning the key. Once done, the hours will start to flash, allowing you to adjust them using the arrows above and below the SELECT button. When the correct hours are set, hold the RESET button, and the minutes will start to flash: these can now be adjusted in the same manner, before turning off the ignition.

Watch the video!


by ScegliAuto

More videos