Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to replace the transmission oil in the Kymco X-Town CT300 scooter, a very simple and quick operation. First, ensure the engine is completely cold for safety. Then, go to the left rear area of the scooter, locate the drain bolt, and remove it using a socket spanner. Once all the oil has drained into a suitable container, remove the second indicated bolt, tighten the lower one, and insert the required amount of oil using a syringe or pump.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Fairing on the Kymco X-Town CT300 Scooter?
How to Remove the Front Fairing on the Kymco X-Town CT300 Scooter?
Xtown 300 .. how to remove the front fairing on the Kymco X-Town CT300 scooter, a very simple and quick operation to perform if you need to access the battery, a.. …
How to Reset the Service on a Kymco X-Town 300 Scooter?
How to Reset the Service on a Kymco X-Town 300 Scooter?
Xtown 300 In this tutorial, you can see how to reset the service on a Kymco X-Town 300 scooter, an extremely simple and quick operation to perform only after c…
How to Replace the Front Headlight Bulb on a Kymco X-Town 300i
How to Replace the Front Headlight Bulb on a Kymco X-Town 300i
Xtown 300 To replace the front headlight bulb on a Kymco X-Town 300i, loosen the screws that secure the front fairing to its housing. Once these screws, locate…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos