Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Xtown 300
Part:

In this tutorial, you will see how to remove the front fairing on the Kymco X-Town CT300 scooter, a very simple and quick operation to perform if you need to access the battery, a fork component, etc. First, unscrew the bolts located at the sides of the windscreen, then move the front logo and remove the additional fixing screw. Once done, separate the windscreen from the support, continue by unscrewing all the other indicated screws, and remove the first panel. At this point, all that remains is to remove the bolts located beneath the battery, use a plastic spatula to pry along the external gap of the fairing, and detach the entire element from the frame.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission Oil in the Kymco X-Town CT300 Scooter?
How to Replace the Transmission Oil in the Kymco X-Town CT300 Scooter?
Xtown 300 .. to replace the transmission oil in the Kymco X-Town CT300 scooter, a very simple and quick operation. First, ensure the engine is completely cold for.. …
How to Replace the Front Headlight Bulb on a Kymco X-Town 300i
How to Replace the Front Headlight Bulb on a Kymco X-Town 300i
Xtown 300 To replace the front headlight bulb on a Kymco X-Town 300i, loosen the screws that secure the front fairing to its housing. Once these screws, locate…
How to Reset the Service on a Kymco X-Town 300 Scooter?
How to Reset the Service on a Kymco X-Town 300 Scooter?
Xtown 300 In this tutorial, you can see how to reset the service on a Kymco X-Town 300 scooter, an extremely simple and quick operation to perform only after c…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos