|
Do it yourself
| |||
| ||||
Model: Kymco Like 125
This guide will show you how to remove and install the windscreen or visor on the Kymco Like 125 scooter. First, place the scooter on its centre stand and begin unscrewing the screws securing the mirrors to remove them; then, unscrew the screws of the visor brackets to take it off. For the new installation, first secure the brackets, then attach the windscreen to them; adjust the height of the visor and secure it properly with the screws provided!
Updated on 25 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Like 125
To install the windscreen on the Kymco Like, first loosen the bolts located at the base of the mirrors so that they can be removed from their housing…
Like 125
In this new guide dedicated to all of you who own a Kymco Like 125, we will explain how to correctly replace the rear wheel. First of all, make sure …
Like 125
In this video tutorial, you will learn how to remove and replace the fuel tap on the Kymco Like 125 scooter, following the instructions below. First,…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
