Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on the Kymco Like 125

Model: Kymco Like 125
Part:

Video tutorial

Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its centre stand and begin unscrewing the side fixing screws of the transmission cover, then remove the cover.

Next, unscrew the central nut of the fan and then that of the clutch bell, removing the drive belt and, if necessary, the variator as shown in the video. At this point, replace and install the new belt, reassembling the entire transmission!


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Replace the Drive Belt on a Kymco Like 125
How to Replace the Drive Belt on a Kymco Like 125
Like 125 Today, follow these instructions to remove and replace the drive belt on the Kymco Like 125 scooter. First, place the scooter on the centre stand and…
How to Replace the Drive Belt on the Kymco Like 125?
How to Replace the Drive Belt on the Kymco Like 125?
Like 125 To replace the drive belt on the Kymco Like 125, first loosen the bolts securing the cover. Once loosened, you can remove the cover and access the va…
How do you replace the belt of the Kymco Like 125?
How do you replace the belt of the Kymco Like 125?
Like 125 It will be possible to replace the belt of the Kymco Like 125 by loosening the screws that secure the cover panel of the transmission case: once thes…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos