Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Like 125
Part:

To replace the drive belt on the Kymco Like 125, first loosen the bolts securing the cover. Once loosened, you can remove the cover and access the variator. To remove the belt, you will need to loosen the nut that secures the central pin of the pulley and remove the pulley itself. You will also need to disassemble the clutch by extracting all its discs; once the pulley and clutch are removed, you can take out the drive belt and replace it with a new one. At the end of the operation, you can reassemble all the other components that were previously removed.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the belt of the Kymco Like 125?
How do you replace the belt of the Kymco Like 125?
Like 125 It will be possible to replace the belt of the Kymco Like 125 by loosening the screws that secure the cover panel of the transmission case: once thes…
How to Replace the Drive Belt on the Kymco Like 125
How to Replace the Drive Belt on the Kymco Like 125
Like 125 Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its ce…
How to Replace the Drive Belt on a Kymco Like 125
How to Replace the Drive Belt on a Kymco Like 125
Like 125 Today, follow these instructions to remove and replace the drive belt on the Kymco Like 125 scooter. First, place the scooter on the centre stand and…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos