Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Oil Service light on the Kymco Dink R 150, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, press and hold the button located on the right side of the handlebars. Keep it pressed until the light disappears completely from the instrument panel. Once the reset is successful, release the button to turn off the instrument panel and complete the operation.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Kymco Dink 150
How to Change the Engine Oil of the Kymco Dink 150
Dink In this guide, you will discover the main steps to perform routine maintenance by changing the engine oil of the Kymco Dink 150 scooter. First, place…
How to replace the engine oil in the Kymco Dink 150?
How to replace the engine oil in the Kymco Dink 150?
Dink You can perform the engine oil change on the Kymco Dink 150 by loosening the drain plug of the oil sump, which is located at the central lower part o…
How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
How to Change the Transmission Oil in a Kymco Dink 150 Scooter?
Dink This tutorial shows how to change the transmission oil in a Kymco Dink 150 scooter, a very simple and quick operation. First, ensure the engine is su…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos