Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator on the Kymco Super 8 125?

Model: Kymco Super 8 125
Part:

Video tutorial

To replace the variator on the Kymco Super 8 125, loosen the screws that secure the transmission cover located on the left side of the scooter near the rear wheel. Once the screws are removed, you can take off the cover and access the components underneath.

The variator can be removed by unscrewing the central nut and subsequently freeing it from the drive belt. At this point, you can insert the new replacement part, reposition the belt, and check that everything functions correctly.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Kymco Super 8 125
How to Replace the Air Filter on a Kymco Super 8 125
Super 8 125 Before you start, position your Kymco Super 8 125 on the centre stand. First, unscrew and remove the screws securing the air filter cover. Next, dise…
How to Replace the Exhaust on a Kymco Super 8 125?
How to Replace the Exhaust on a Kymco Super 8 125?
Super 8 125 To replace the exhaust on a Kymco Super 8 125, loosen the screws that secure the exhaust end can to its mounting near the rear wheel on the right sid…
How do you replace the rear headlight bulb of the Kymco Super 8 125?
How do you replace the rear headlight bulb of the Kymco Super 8 125?
Super 8 125 In order to replace the rear headlight bulb of the Kymco Super 8 125, you need to open the underseat compartment, so that you can locate the screws a…

How to Change the Engine Oil in a Honda Dio Scooter?

In this tutorial, see how to change the engine oil in a Honda Dio scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough to work safely, then position a container underneath the scooter, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out, then tighten the bolt after applying a new washer and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos