Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on a Kymco Xciting S 400i?

Model: Kymco Xciting S 400i
Part: Spark plugs

Video tutorial

To replace the spark plug on the Kymco Xciting S 400i, loosen the screws that secure the panel covering the footrest on the left side of the bike. Once the footrest cover panel is completely removed, you will be able to locate the ignition coil underneath.

This can be extracted from its housing, allowing you to access the spark plug below: remove the old spark plug using a socket wrench, insert the new one, secure it in place, reinstall the coil, and cover everything with the appropriate panel.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Spark Plug from the Kymco Xciting 400s - 400i
How to Remove the Spark Plug from the Kymco Xciting 400s - 400i
Xciting S 400i This guide explains how to remove and replace the spark plug of the Kymco Xciting 400S scooter, as well as the 400I. First, remove the left side pane…
How to Replace the Exhaust on a Kymco Xciting S 400i
How to Replace the Exhaust on a Kymco Xciting S 400i
Xciting S 400i You can replace the exhaust on a Kymco Xciting S 400i by loosening the screws that secure the exhaust tip to its housing, located near the rear wheel…
How to Replace the Brake Lever on a Kymco Xciting S 400i?
How to Replace the Brake Lever on a Kymco Xciting S 400i?
Xciting S 400i To replace the brake lever on a Kymco Xciting S 400i, loosen the nut that secures the locking pin of the lever: this nut is located at its bottom. On…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos