Do it yourself
Frequently asked questions about cars and motorcycles
This guide explains how to remove and replace the spark plug of the Kymco Xciting 400S scooter, as well as the 400I. First, remove the left side panel of the scooter by unscrewing all the securing screws; then use a spark plug socket to unscrew and remove the spark plug after disconnecting the cap or connector. Now replace the old spark plug with a new one of the correct type (with the same heat rating); start by hand-tightening it before securing it with a socket!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Xciting S 400i .. to replace the spark plug of the Kymco Xciting S 400i, you need to loosen the screws that secure the panel covering the footrest on the left side of.. …
Xciting S 400i .. To perform the oil change on the Kymco Xciting S 400i, you will need to loosen the screws that hold the drain plug of the oil pan located in the central.. …
Xciting S 400i .. to replace the gearbox oil of the Kymco Xciting S 400i scooter. First, place your scooter on the centre stand and start unscrewing the oil drain bolt;.. …

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos