Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a Lancia Lybra

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

Video tutorial

In today's video tutorial, learn how to remove the front door panel of a Lancia Lybra in simple and quick steps. First, open the front door and start by unscrewing all the screws found on the door panel; these are located inside the grab handle, underneath, and on the sides of the panel.

Next, remove the window switch panel by disconnecting the electrical connector, and also take off the cover of the opening handle, disconnecting the electrical cable in this case as well; all that’s left is to remove the door panel, as shown in the video!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Lancia Lybra
How to Remove the Door Panel of a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before you begin, open the front door of your Lancia Lybra. Start by unclipping and removing the window switch panel, then disconnect the correspondi…
How to Replace the Front Door Speaker on a Lancia Lybra
How to Replace the Front Door Speaker on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before starting, open the front door of your Lancia Lybra. Begin by prising off the speaker cover using a flathead screwdriver. Next, unscrew and rem…
How to Remove the Door Panel on a Lancia Lybra
How to Remove the Door Panel on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before you start, open the front door of your Lancia Lybra. Begin by prising out and removing the window switch panel, then disconnect the associated…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos