Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Lancia Lybra

Model: Lancia Lybra MK 1 - Years 1998-2005
Part: Door trim panel

Before you begin, open the front door of your Lancia Lybra. Start by unclipping and removing the window switch panel, then disconnect the corresponding electrical connector. After this, unclip and remove the inserts of the door panel using a thin but sturdy tool, revealing the screws that secure the door panel. Now, unscrew and remove all the screws, then unclip and remove the door panel from its housing. Once you have completed this last step, disconnect the handle cable, and you will have successfully removed the panel.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Lancia Lybra?
How to Remove the Door Panel of the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) To remove the door panel of the Lancia Lybra, first detach the trim located at the top of the panel, at the base of the window. Next, loosen the scre…
How to Replace the Door Panel on Lancia Lybra
How to Replace the Door Panel on Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) How to replace the panel on the Lancia Lybra? Let's see how to disassemble the pieces assembled over the door panel. Remove the plastic behind the op…
How to Remove the Door Panel on a Lancia Lybra
How to Remove the Door Panel on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before you start, open the front door of your Lancia Lybra. Begin by prising out and removing the window switch panel, then disconnect the associated…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos