Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panel on Lancia Lybra

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Door trim panel

Video tutorial

How to replace the panel on the Lancia Lybra? Let's see how to disassemble the pieces assembled over the door panel. Remove the plastic behind the opening lever and disconnect the electrical connector.

Unscrew the screws located in the space of the upper door opening lever and the screws present in the handle. Remove the switch panel from inside the internal handle of the door (disconnect the electrical connector).

Unscrew the remaining screws on the door panel and detach the retaining clips, then pull the panel off by hand and unclip it from the door (disconnect the power wiring and the opening cable). Fit a new cover panel.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel on a Lancia Lybra
How to Remove the Front Door Panel on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) In today's video tutorial, learn how to remove the front door panel of a Lancia Lybra in simple and quick steps. First, open the front door and start…
How to Remove the Door Panel of a Lancia Lybra
How to Remove the Door Panel of a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before you begin, open the front door of your Lancia Lybra. Start by unclipping and removing the window switch panel, then disconnect the correspondi…
How to Remove the Door Panel of the Lancia Lybra?
How to Remove the Door Panel of the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) To remove the door panel of the Lancia Lybra, first detach the trim located at the top of the panel, at the base of the window. Next, loosen the scre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos