Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment in the Center Tunnel of a Range Rover Sport

Model: Land Rover Range Rover L322, MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Center console tunnel

See other generations:
Video tutorial

In this video, see how to remove the glove compartment located in the center tunnel of a Land Rover Range Rover Sport. Use a plastic trim tool to pry off the edge at the back of the center tunnel.

After removing the plastic cover, unscrew the glove compartment using a socket wrench from the previously removed cover. Once this is done, pull off the glove compartment cover and disconnect the power cables.

Finally, insert the new piece into the center tunnel, and reassemble all the glove compartment components as they were removed.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
How to Replace the Cabin Filter in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) To replace the cabin filter in the Land Rover Range Rover Sport, press the designated button on the dashboard to open the glove compartment on the pa…
How to Set the Time on a Range Rover Sport
How to Set the Time on a Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) Before you begin, sit in the driver's seat of your Range Rover Sport. Start by activating the onboard computer by pressing the power button located o…
How to Replace the Cabin Filter in the Land Rover Range Rover Sport L332?
How to Replace the Cabin Filter in the Land Rover Range Rover Sport L332?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the cabin filter in the Land Rover Range Rover Sport L332, open the glove compartment on the passenger side and detach the two side pins t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos