Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Box Door

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Glove compartment

See other generations:
Video tutorial

Removing the glove box door is extremely simple as it involves unscrewing the screws that secure the lower hinges. Once the screws are removed, open the door and detach the side guides that act as supports and limit stops by compressing the spring.

At this point, you can completely remove the door and perform any necessary repairs or replacements. It is common for the plastic locking mechanism to become damaged, which cannot be replaced, so the entire door must be changed.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to Replace the Liftgate Strut on the Land Rover Discovery Sport Mk5
How to Replace the Liftgate Strut on the Land Rover Discovery Sport Mk5
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) This guide shows how to replace the liftgate strut on the Land Rover Discovery Sport Mk5. First, after securing the liftgate in the open position, di…
Removing Cabin Air Filter from the Glove Compartment of a Discovery 3
Removing Cabin Air Filter from the Glove Compartment of a Discovery 3
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Let's remove the cabin air filter on a Land Rover Discovery 3. Open the passenger side door, then open the glove compartment to access the storage dr…
How to Open the Tailgate on a Land Rover Discovery 3
How to Open the Tailgate on a Land Rover Discovery 3
Land Rover Discovery (2004-2010 / LR3, L319, Discovery 3, MK 3) In this video, see how to automatically open the tailgate of a Land Rover Discovery 3. This is a very simple operation: take the vehicle's remote key…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos