Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Cabin Air Filter from the Glove Compartment of a Discovery 3

Model: Land Rover Discovery MK 4, LR4, Discovery 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

Let's remove the cabin air filter on a Land Rover Discovery 3. Open the passenger side door, then open the glove compartment to access the storage drawer. Disconnect the side arms to slide the drawer down and locate the air filter cover.

Remove the plastic cover and pull the air filter out of the housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Ensure the air filter is installed correctly to avoid any operational issues.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Land Rover Discovery Sport?
What is the Fuse Diagram for the Land Rover Discovery Sport?
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) If a device in your Land Rover Discovery Sport suddenly stops working, first check the status of the respective fuses, which are detailed in this vid…
How to Remove the Center Dashboard of a Land Rover Discovery
How to Remove the Center Dashboard of a Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Before you can start, sit in the driver's seat of your Land Rover Discovery. Begin by removing everything from the upper glove compartment located be…
Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos