Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Cabin air filter

Land Rover Discovery - Cabin air filter

Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
How do you replace the cabin filter on Land Rover Discovery?
In order to replace the cabin filter on the Land Rover Discovery, you need to remove the protective panel located between the footrest compartment on the front …read all…
Posted on 3 April 2023 by ScegliAuto
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
Removing the air filter from the glovebox of a Discovery 3
We see the disassembly of the cabin air filter on a Land Rover Discovery 3. We open the door on the passenger side, then we open the glovebox to access the …read all…
Posted on 21 January 2024 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Cabin filter replacement on Land Rover Discovery
Remove all the iron fasteners located near the windshield, using pliers. There are seven metal staples in all. On this model of car usually, over the years, …read all…
Posted on 4 January 2024 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Replacing the cabin air filter
The passenger compartment air filter is located inside the glovebox. Once the drawer has been opened, the guides are detached from the seats by pressing on …read all…
Posted on 21 July 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos