Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Windscreen wipers

Land Rover Discovery - Windscreen wipers

Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
How do I replace the wiper motor on Land Rover Discovery?
To be able to replace the wiper motor on Land Rover Discovery 2, you need to open the hood to access the engine compartment and unhook the grille located …read all…
Posted on 10 March 2024 by ScegliAuto
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
Change rear wiper blade on Land Rover Discovery
It may seem like a very simple job, yet many have no idea how to do it. First of all, it is necessary to widen the two fins, as shown in the video, and remove …read all…
Posted on 3 February 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Some disassemble the rod with the rear wiper blade of a Land Rover Discovery 3
Let's see in this video how to remove the rod with the rear wiper blade of a Land Rover Discovery 3. Let's remove the central nut with a socket wrench after …read all…
Posted on 13 October 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos