Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : Car stereo

Land Rover Discovery - Car stereo

Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Disassembly of central dashboard and radio on Land Rover Discovery 3

Remove the car radio frame by simply pulling it by hand, taking it from the bottom as shown in the video. It is one with the central air vents. In this way you …read all…
Posted on 20 January 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Car stereo replacement on Land Rover Discovery

Remove the two side plastics of the car radio, attached together with the air vents, pulling them by hand from the lower part, as shown in the video. Using a …read all…
Posted on 20 January 2024 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Land Rover Discovery car radio disassembly

Does the Land Rover stereo need to be replaced? Let's see how it disassembles on a Discovery. We disassemble the stereo with the metal sticks (where there are …read all…
Posted on 6 December 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Disassemble car stereo on Land Rover Discovery

Is the Land Rover Discovery stereo damaged? Let's see how it is removed from inside the dashboard. Disassemble the stereo cover, with a plastic lever (where …read all…
Posted on 6 December 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
How to fix the car radio that does not turn on.

Consult the user and maintenance manual and check the numbers that identify the fuses relating to the car radio that does not turn on. Open the hood of the …read all…
Posted on 10 September 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Car radio disassembly instructions

Before proceeding with the disassembly of the standard car radio, it is recommended that you check that you have any unlock code required for subsequent …read all…
Posted on 5 September 2023 by ScegliAuto

Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos