Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Land Rover Discovery

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Car stereo

Remove the two side plastic covers of the radio, attached to the air vents, by pulling them from the bottom, as shown in the video. Using a T20 Torx wrench, unscrew the screws that secure the radio on the sides, and at this point, pull it out. Behind it, you will find the connector and the antenna cable, which you need to disconnect. To install the new radio, simply connect it to the connector and the antenna cable, then insert it into place and screw in the side fastening screws. Finally, reattach the plastic covers with the air vents.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to disassemble the central part of the dashboard of the Land Rover Discovery
How to disassemble the central part of the dashboard of the Land Rover Discovery
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) The following steps will show us the procedure for disassembling and replacing the central part of the dashboard of the Land Rover Discovery. First, …
Replacing Battery in Land Rover Discovery
Replacing Battery in Land Rover Discovery
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) Let's see how to remove and replace the battery in a second-generation Land Rover Discovery by following these simple instructions. First, open and l…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos