Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Side Air Intake on a Land Rover Freelander

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air vents

See other generations:
Video tutorial

Before starting, it is advisable to disconnect the battery for safety. Begin by unclipping the indicator located above the air intake, then disconnect the plug connected to it. This will remove the side indicator, allowing you to focus on the air intake itself.

Proceed to pull from the bottom of the air intake, thereby releasing the lower clips. Next, lift the lower part, which will also release the upper clips.

Once this step is completed, you will have successfully disassembled it and will be free to install the new air intakes.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…
How to Replace the Cabin Air Filter on a Land Rover Freelander 2
How to Replace the Cabin Air Filter on a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Although the cabin air filter on your Land Rover Freelander 2 is not the easiest to reach, the replacement is still quite simple and quick. Here's ho…
How to Remove the Engine Air Filter on a Land Rover Freelander
How to Remove the Engine Air Filter on a Land Rover Freelander
Land Rover Freelander (2006-2016 / Freelander 2) How to remove the engine air filter on a Land Rover Freelander? Open the car door, pull up the engine compartment release lever located at the bottom…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos