|
Do it yourself
| |||
| ||||
How to Replace the Battery in a Land Rover Freelander
Model: Land Rover Freelander
Freelander 2
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
In this video tutorial, see how to replace the battery in a Land Rover Freelander by following some simple steps: lift the bonnet and secure it with the appropriate prop; the battery is located at the rear of the engine bay, so pull forward the clips and remove the battery cover, disconnect the breather pipe from the front of the battery, loosen the securing nut and, with a twisting motion, slide the negative cable clamp off the battery terminal, placing the cable to the side to avoid accidental reconnections. Loosen the securing nut and disconnect the positive cable clamp. Unclip the cable from the battery bay and position it to the side, remove the bolt and take off the battery hold-down. Lift the battery from its place (be careful as the battery is heavy). Maneuver the new battery into position with the negative terminal. Refit the battery clamp and tighten the bolts securely. Slide the positive cable seal into the slot in the battery bay, then firmly press the cable clamp onto the positive terminal of the battery and tighten the clamp nut securely. Press the negative cable clamp onto the terminal and tighten the securing nut. Reconnect the breather pipe to the front of the battery. Apply a little petroleum jelly to the terminals to prevent corrosion. Refit the cover.
Updated on 6 July 2026 by ScegliAuto
Related tutorials
Land Rover Freelander
(1997-2006 /
Freelander 1)
Before you begin, open the front bonnet of your Land Rover Freelander. Start by unclipping and removing the auxiliary belt cover. This will also expo…
Land Rover Freelander
(2006-2016 /
Freelander 2)
Replacing the flat battery of the remote for the Land Rover Freelander involves simple and quick steps you can do yourself. To replace the battery, y…
Land Rover Freelander
(1997-2006 /
Freelander 1)
If you own a first-generation Land Rover Freelander and are wondering where the OBD port is located, read this guide and follow the few simple steps …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |