Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Timing belt

Land Rover Discovery - Timing belt

Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
Distribution chains of the Land Rover Discovery Sport
In this video, we see that in a Land Rover Discovery Sport, there are not just one but three timing chains. On one side, we have an upper and a lower chain, …read all…
Posted on 3 February 2024 by ScegliAuto
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
How and when to replace the timing chain of the Land Rover Discovery 2.0d.
Below we will see the instructions that will show us how and when to disassemble and replace the timing chain of the Land Rover Discovery, with a 2.0 Diesel …read all…
Posted on 15 October 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
How do I replace the Land Rover Discovery timing chain?
In order to replace the Land Rover Discovery's timing chain, you need to loosen the sprockets located on the left side of the engine block. In this way the …read all…
Posted on 19 August 2022 by ScegliAuto
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
How to replace the Land Rover Discovery 4 timing belt
In this video we will show you how to replace the Land Rover Discovery 4 timing belt. After opening the bonnet and identifying the position of the timing …read all…
Posted on 3 May 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
When and how to replace the timing belt on Land Rover Discovery 3 2.7 TDV6
In this guide we will see when and how to change the timing belt on the Land Rover Discovery third series 2.7 TDV6, but also on the other models of the …read all…
Posted on 6 March 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Land Rover Discovery SDV6 3.0L timing belt replacement
In this video tutorial we will see the main instructions to be able to disassemble and replace the timing belt on a Land Rover Discovery SDV6 3.0L. We open and …read all…
Posted on 30 December 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Land Rover Discovery, Jaguar 2.7 L timing belt replacement
Today we will see how to remove and replace the timing belt of a Land Rover Discovery, but also on other models of the house and also on some Jaguars powered …read all…
Posted on 28 December 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Timing belt replacement
The timing belt is one of the most important parts inside the engine of our cars. It is advisable to replace this part every 80,000 km approximately, in order …read all…
Posted on 10 September 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos