Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain in a Land Rover Discovery?

Model: Land Rover Discovery MK 2, Discovery 2, L318 - Years 1998-2004
Part: Timing belt

To replace the timing chain in a Land Rover Discovery, you need to loosen the sprockets located on the left side of the engine block. This will reduce the tension on the chain, allowing it to be removed from its housing and replaced with a new part. After the new chain is positioned around the sprockets, you can close everything with the appropriate cover and reinstall the components that were previously removed, ensuring that everything functions correctly.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Chain on a Land Rover Discovery 2.0d
How and When to Replace the Timing Chain on a Land Rover Discovery 2.0d
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Below are the instructions on how and when to disassemble and replace the timing chain on a Land Rover Discovery with a 2.0 Diesel engine. The timing…
Timing Chains of the Land Rover Discovery Sport
Timing Chains of the Land Rover Discovery Sport
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) In this video, you will see that a Land Rover Discovery Sport has not just one timing chain, but three. On one side, there is an upper chain and a lo…
How to Replace the Timing Belt on the Land Rover Discovery 4
How to Replace the Timing Belt on the Land Rover Discovery 4
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this video, you will learn how to replace the timing belt on the Land Rover Discovery 4. After opening the hood and locating the timing assembly, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos