Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Chain on a Land Rover Discovery 2.0d

Model: Land Rover Discovery L462, Discovery 5, MK 5 - Years 2017-2024
Part: Timing belt

Below are the instructions on how and when to disassemble and replace the timing chain on a Land Rover Discovery with a 2.0 Diesel engine. The timing chain should be replaced every 62,137 miles or 5 years; therefore, perform a visual inspection before this deadline to check the wear condition of the chain. To disassemble the timing chain, you will need to remove the cylinder head cover, disassemble the engine mount, and remove the serpentine belt. Then, take the references for replacing the timing chain by following the video tutorial to the end!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain in a Land Rover Discovery?
How to Replace the Timing Chain in a Land Rover Discovery?
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) To replace the timing chain in a Land Rover Discovery, you need to loosen the sprockets located on the left side of the engine block. This will reduc…
How to Replace the Timing Belt on the Land Rover Discovery 4
How to Replace the Timing Belt on the Land Rover Discovery 4
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this video, you will learn how to replace the timing belt on the Land Rover Discovery 4. After opening the hood and locating the timing assembly, …
Guide to replacing the timing belt of the Land Rover Discovery 3.0 TDV6
Guide to replacing the timing belt of the Land Rover Discovery 3.0 TDV6
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) The instructions illustrated in this guide will show us how to disassemble and replace the timing belt of the Land Rover Discovery 3.0 TDV6. In order…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos