Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine Mount from Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine mount

See other generations:
Video tutorial

Removing the engine mount from a Freelander 2. Let’s look at the removal from inside the engine bay. Lift the front bonnet and secure it. Remove the coolant reservoir to access the engine mount. Use a socket spanner to undo the securing bolts above the metal part of the engine mount.

Secure the new engine mount in its housing (tighten the securing bolts). Reinstall the coolant reservoir and reconnect the hoses.

Test the operation of the fitted part in the engine bay. Use a jack to lift the vehicle.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve in a Land Rover Freelander 2
How to Replace the EGR Valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…
Freelander Battery Removal
Freelander Battery Removal
Land Rover Freelander (1997-2006 / Freelander 1) Is the battery of your Land Rover Freelander faulty? Here’s how to replace it. Open the car door and pull up the engine compartment release lever loc…
How to Remove the Front Headlamp of the Land Rover Freelander 2.2 TD4?
How to Remove the Front Headlamp of the Land Rover Freelander 2.2 TD4?
Land Rover Freelander (2006-2016 / Freelander 2) To replace the front headlamp of the Land Rover Freelander, first lift the bonnet and remove the screws securing the old headlamp. Once loosened, dis…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos