Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Accessory Kit

Land Rover Discovery - Accessory Kit

Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Installation of a led light bar.
The bar will be mounted on the roof of the car, above the two handles that we find in this case. First of all we connect the power cables of the bar (supplied …read all…
Posted on 15 September 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Assembly of automotive LED strips
Easy to assemble and versatile in applications, LED strips are a practical and original lighting solution. They are used not only as a decorative element but …read all…
Posted on 13 September 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Installation of LED fog lights
The installation of additional fog lights on an off-road vehicle is certainly a very useful accessory both to improve the appearance and to perfectly …read all…
Posted on 2 September 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Differential lock lever installation
Especially in four-wheel drive cars, having the ability to lock the differential is very useful in situations where the terrain puts a strain on the car. This …read all…
Posted on 18 July 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos