Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a LED Light Bar

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Accessory kit

See other generations:
Video tutorial

Mount the light bar on the roof of the vehicle, above the two grab handles. First, connect the power wires of the bar (included in the kit) to the car battery, and from there, to the fuse box and ground.

To do this, run the wires under the plastic trim along the windshield. Additionally, install the switch inside the vehicle.

Finally, position the LED light bar above the two grab handles located on the roof of the vehicle. The maintenance operation shown in the images is performed on a Land Rover Discovery.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Installing LED Strips in Your Car
Installing LED Strips in Your Car
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Easy to install and versatile in applications, LED strips are a practical and original lighting solution. They are used not only as decorative elemen…
Installing LED Fog Lights
Installing LED Fog Lights
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Installing additional fog lights on an SUV is certainly a very useful accessory for both enhancing appearance and perfectly illuminating any off-road…
Installing the Differential Lock Lever
Installing the Differential Lock Lever
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Especially in four-wheel drive vehicles, having the ability to lock the differential is very useful in situations where the terrain challenges the ve…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos