Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield from a Land Rover Defender

Model: Land Rover Defender MK 6 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Windshield

See other generations:
Video tutorial

Using a common utility knife, start by making a cut inside the side protective sheath of the windshield. Next, remove the entire sheath by simply pulling it off. Once the sheath is completely removed, the windshield will be properly freed.

To remove it, simply pull it out, using special suction cups for assistance. Once you have extracted it from its housing, you will have successfully completed the removal of the windshield from your Land Rover Defender, and you will be ready to install the new windshield.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Land Rover Defender
Where to Find the Fuse Box of the Land Rover Defender
Land Rover Defender (1990-2016 / MK 6) If you want to locate the fuse box in your Land Rover Defender (2007-2011) on your own, just carefully read the following guide and put into practice…
Replacing the Fuel Filter on the Land Rover Defender 1
Replacing the Fuel Filter on the Land Rover Defender 1
Land Rover Defender (1983-1990 / MK 5) Discover how to remove and replace the fuel filter on the first series Land Rover Defender by following these simple steps. First, open the hood of y…
Where to Find the Fuse Box of the Land Rover Defender
Where to Find the Fuse Box of the Land Rover Defender
Land Rover Defender (1990-2016 / MK 6) The box that contains all the various fuses for your Land Rover Defender (2001-2006) is located inside the cabin. With this guide, you will be able t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos