Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Discovery - Headlight

Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
Land Rover Discovery bulb replacement
Open the hood and put on the special support rod. For safety, work with the ignition key off, the battery disconnected and the handbrake on. Unscrew the four …read all…
Posted on 24 March 2024 by ScegliAuto
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
Removing the Discovery Sport headlight bulb
Let's see the disassembly of the rear light of the Discovery to replace the damaged bulbs. We lift the tailgate of the car, then we remove the central mask to …read all…
Posted on 20 March 2024 by ScegliAuto
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
Remove the Discovery Sport headlight
How to remove the headlight of the Land Rover Discovery? Let's see how the headlight is removed from above the front bumper. Let's start by removing the front …read all…
Posted on 15 February 2024 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Front headlight disassembly instructions
The disassembly of the front light is extremely simple to carry out since it is fixed by interlocking in its seat; therefore open the front hood and secure it …read all…
Posted on 4 September 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos