Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Headlight

Model: Land Rover Discovery MK 2, Discovery 2, L318 - Years 1998-2004
Part: Headlight

Removing the front headlight is extremely simple since it is secured in place; open the hood and secure it with the prop rod. Remove the plastic cover located just above the headlight by disengaging the securing tabs. At this point, pry behind the headlight to release it from its housing (two pins are secured in specific plastic bushings), pull it forward enough to disconnect the bulb power connectors, and complete the removal.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Headlight Bulb on Discovery Sport
Removing Front Headlight Bulb on Discovery Sport
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Let's see how to remove the rear headlight on the Discovery to replace damaged bulbs. Lift the trunk of the vehicle, then remove the central cover to…
Remove Front Headlight of the Discovery Sport
Remove Front Headlight of the Discovery Sport
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) How do you remove the front headlight of the Land Rover Discovery? Let's see how to take off the headlight from above the front bumper. Start by remo…
Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Next, we will see how to remove and replace the headlight bulb on the Land Rover Discovery, following the instructions below. First, open the hood of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos