Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : Replacing the headlight bulbs of a Land Rover Discovery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 3, L319, MK 3, LR3 - Years 2004-2010
Part: Headlight bulb
Operation: Replacing the headlight bulbs of a Land Rover Discovery

Do you want to replace the headlight bulbs of a Land Rover Discovery and don't know how to do it? Let's see how to proceed in the video guide: open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We unscrew the locking pins (on the bar next to the lighthouse) with a socket wrench or cordless screwdriver. After removing the central mask, we will find other pins on the side of the headlight: let's unscrew them from the metal plates. We detach the lamp holders from the headlight and extract the same from the car body. We assemble the new headlight with new bulbs if damaged (always suitable type and size); we insert the lighthouse in its housing and tighten the pins of the lighthouse with the socket wrench. We test the correct functioning of the lights.


Posted on 28 October 2023 by ScegliAuto



How to replace the rear taillight of a Land Rover Discovery III
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video we see how to change the rear light of a Land Rover Discovery III; we start by removing the two screws on the inside compared to the tr
Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
How to replace climate control light bulbs on Land Rover Discovery 2
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Let's see in this short video how to replace the air conditioning control bulbs on a Land Rover Discovery second series, in simple steps. First we ge

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos