Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Land Rover Discovery

Model: Land Rover Discovery L462, MK 5, Discovery 5 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Today's procedure will guide you through the steps to remove and replace the headlight bulb on the Land Rover Discovery. First, open the hood and start by removing the air intake duct.

Next, disconnect the electrical connector along with the bulb, removing it and replacing it with a new one (with the same base), as shown in the video. At this point, install the new low beam bulb, checking its operation; reassemble everything onto the headlight assembly, and finally reinstall the air intake hose!


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Next, we will see how to remove and replace the headlight bulb on the Land Rover Discovery, following the instructions below. First, open the hood of…
How to Remove the Headlight from the Land Rover Discovery?
How to Remove the Headlight from the Land Rover Discovery?
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) To remove the headlight from the Land Rover Discovery, lift the hood and remove the front grille: simply unclip the clips that hold it in place. You …
How to Replace the Rear Headlight Bulb on a Land Rover Discovery
How to Replace the Rear Headlight Bulb on a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Before you begin, head to the rear light of your Land Rover Discovery. Start by unscrewing and removing the screws that secure the rear light, then r…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos