Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Headlight on a Land Rover Discovery

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you can see the steps to replace the bulbs in the front headlight of a Land Rover Discovery. First, prepare all necessary materials (Phillips screwdriver, new H7 12.8 Volt-55W bulbs, a plastic lever, a hex socket wrench, a Torx socket wrench).

Now, use the Phillips screwdriver to unscrew and remove the front grille of the vehicle; use a plastic lever to remove the pins from the screws you have taken out; grasp the grille and pull it towards you. Use the socket wrench to remove the nuts located above the headlight (see video); use the Torx wrench to remove the screws found on the inner sides of the headlight, where you removed the grille.

At this point, you will be able to easily detach the headlight; disconnect the electrical connector and proceed to replace the bulbs.

Reassemble all components in reverse order.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Next, we will see how to remove and replace the headlight bulb on the Land Rover Discovery, following the instructions below. First, open the hood of…
Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Today's procedure will guide you through the steps to remove and replace the headlight bulb on the Land Rover Discovery. First, open the hood and sta…
How to Replace the Rear Headlight Bulb on a Land Rover Discovery
How to Replace the Rear Headlight Bulb on a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Before you begin, head to the rear light of your Land Rover Discovery. Start by unscrewing and removing the screws that secure the rear light, then r…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos