Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How to replace the rear light bulb on a Land Rover Discovery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years 1998-2004
Part: Rear light bulb
Operation: How to replace the rear light bulb on a Land Rover Discovery

Before we can begin, we will have to head to the taillight of our Land Rover Discovery. So let's start by unscrewing and removing the screws that secure the rear light, and then removing the light itself. By doing so, we will have reached the pin of the burned out light bulb, which we will have to go to disengage, and then pull it towards us, and we will have reached the burned out light bulb. At this point, we will have to disconnect the plug from the bulb, and we will have finished the disassembly. To fit the new bulb and reassemble the headlight, we will simply have to follow these instructions in reverse, and we will have successfully completed the replacement.


Posted on 16 January 2024 by ScegliAuto



Replacement of the front headlight bulb of the Land Rover Discovery.
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Below we will see how to disassemble and replace the front headlight bulb of the Land Rover Discovery, following the instructions below. First, we op
Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
How to reset the "Service" light on a Land Rover Discovery
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery 5) Before we can begin, we will need to make sure the driver's door and front hood are open. So let's start by activating the instrument panel of our La

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos