Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How do I remove the Land Rover Discovery headlight?

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery LR4, MK 4, Discovery 4 - Years 2010-2016
Part: Light bulb
Operation: How do I remove the Land Rover Discovery headlight?

In order to remove the front headlight of the Land Rover Discovery it is necessary to lift the bonnet and remove the front grille: to do this, simply unhook the clips with which it is fixed. To remove the light from its housing, you do not need to loosen any bolts: this is simply anchored thanks to two pins. Using a flat screwdriver, you will need to lever and lift these two pins, which are respectively to the right and left of the headlight. Once raised, it will be possible to remove the light and disconnect the connector in order to replace it.


Posted on 24 February 2024 by ScegliAuto



Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / LR4, MK 4, Discovery 4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
Replacement of the front headlight bulb of the Land Rover Discovery.
Land Rover Discovery (2010-2016 / LR4, MK 4, Discovery 4) Below we will see how to disassemble and replace the front headlight bulb of the Land Rover Discovery, following the instructions below. First, we op
How to replace the rear taillight of a Land Rover Discovery III
Land Rover Discovery (2004-2010 / LR3, L319, MK 3, Discovery 3) In this video we see how to change the rear light of a Land Rover Discovery III; we start by removing the two screws on the inside compared to the tr

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos